- Größe von 5 mm IR -Durchleitungs -LED -

- Durch -Loch -IR -LED -Strahlung -

*Farben auf dem Foto wurden von der Kamera übernommen. Bitte nehmen Sie die tatsächliche emittierende Farbe standardmäßig auf.

- Durchschnittlich des Loch -IR -LED -Parameters -

Absolute maximale Bewertungen bei TA = 25 ℃

Parameter	Symbol	Rating
Power Dissipation	Pd	170mw
Pulse Forward Current	IFP	1000mA
Forward Current	IF	100mA
Reverse Voltage	VR	5V
Junction Temperature	Tj	115°C
Operating Tempertature	Topr	-40 - +80°C
Storage Tempertature	Tstg	-40 - +100°C
Soldering Temperature	Tsol	260°C
Electro-Static-Discharge(HBM)	ESD	3000v
Warranty	Time	5Years
Antistatic bag	Piece	1000Back
*Pulse Forward Current Condition:Duty 1% and Pulse Width=10us.
*Soldering Condition:Soldering condition must be completed with 3 seconds at 260°C

Optische und elektrische Eigenschaften ( t C = 25 ℃ )

Parameter	Symbol	Min	Typ	Max	Unit	Test Condition
Forward Voltage	VF	1.3	1.5	1.7	V	IF=50mA
		1.65	1.7	1.9	V	IF=100mA
			3		V	IF=1000mA
Rediant Intensitye	Ee		25	35	mw/sr	IF= 50mA
		60		80	mw/sr	IF=100mA
			720		mw/sr	IF=1000mA
Luminous Power	PO		18		mw	IF=50mA
			45		mw	IF=100mA
			450		mw	IF=1000mA
Peak Wavelength	λP	845	850	855	nm	IF=20mA
Half Width	Dl		25		nm	IF=20mA
Viewing Half Angle	2q1/2		±22		deg	IF=20mA
Reverse Current	IR			5	uA	VR=5V
*Luminous Intensity is measured by ZWL600.
*q1/2 is the off-axis angle at which the luminous intensity is half the axial luminous intensity.
*lD is derived from the CIE chromaticity diagram and represents the single wavelength which defines the color of the device.