Privacy statement: Your privacy is very important to Us. Our company promises not to disclose your personal information to any external company with out your explicit permission.
According to Reuters in many laboratories in the life sciences require fast, accurate and reliable measurement methods. This is especially true in high performance liquid chromatography (HPLC) and DNA concentration and purity measurements, all of which rely on quantitative analysis by absorption spectroscopy. Leading instrument manufacturers for these applications are looking for alternative sources such as UVC (C-band UV LEDs in the 100-280 nm range) as a means of meeting the new needs of their end users. UVC LEDs offer these manufacturers the opportunity to provide miniaturization and low-cost solutions to differentiate their products and increase market penetration.
UV LEDs in other frequency bands have been widely used in some applications. The use of UVC LEDs is limited by LED efficiency, especially at the upper limit of the spectral band.
The UVC LEDs at the upper limit are very useful in many test and measurement-centric applications in the life sciences. Laboratories are looking for small instruments that cost less than comparable large instruments to increase productivity and laboratory performance. Emerging technologies are miniaturizing instruments, which not only reduces costs, but also reduces laboratory use. Low-cost, small-sized LED-based instruments allow researchers to perform routine measurements on their benches. At the same time, when full-spectrum measurements are required, researchers can use more expensive full-spectrum UV lamps at the center of the lab, which reduces lab bottlenecks and increases productivity.
In the past, instrument manufacturers were hindered by the lower performance of UVC LEDs on the market during development. However, with the advent of higher performance components, manufacturers can use LED capabilities to address these trends with new instrument models. In this article, some applications of 270nm UVC LEDs will be discussed.
UV LED are availabel in 2835 SMD LED, 2016 SMD LED, 5050 SMD LED, 5730 SMD LED size of package.
UVC LED, also name as UV LED, facilitates fixed wavelength detection in HPLC
High performance liquid chromatography (HPLC) is a separation technique that introduces a sample mixture into a column. Since the components in the sample solution have different partition coefficients between the mobile phase and the stationary phase, when the relative motion is performed in the two phases, the components are moved at a moving speed after repeated adsorption-desorption processes. A large difference is produced, which is separated into individual components and sequentially flows out of the column. The detection of these components was mainly carried out by using an absorption spectrum of an ultraviolet spectrophotometer. HPLC is commonly used for routine process monitoring, quality control, and biotechnology research in protein purification, pharmaceutical and beverage manufacturing.
Current HPLC detectors typically use xenon lamps as their primary source. The HPLC manufacturer chose a xenon lamp because of the high stability of the light output during the measurement period. In HPLC, the high light output stability of the UV source ensures that lower concentrations of compounds are detected. Compared to other UV lamps such as Xenon flash lamps or mercury lamps, the stability of xenon lamps is increased by two orders of magnitude.
LED achieves stability requirements
The new high-performance UV LEDs are equivalent to high-end xenon lamps with peak fluctuations below 0.005%. UVC LEDs provide similar sensitivities while reducing the cost and size of the overall instrument for fixed wavelength detection. In this way, when the manufacturer needs a single or a few fixed wavelengths, it can help the end user to use the laboratory area reasonably. In addition, LEDs offer a longer life and turn them on immediately, ensuring that LED life is not wasted in preheating, unlike xenon lamps. In addition, light from the LEDs can be easily fiber coupled, which is advantageous in applications where isolation of the flow cell is required. Manufacturers can choose UVC LEDs as an alternative source for fixed wavelength detectors and build more cost effective systems.
For fixed wavelength HPLC systems, the biggest difference in cost is usually due to the cost of the initial configuration as it includes the light source and other ancillary equipment. An HPLC system using an LED detector requires a power supply, a photodiode, and a beam splitter. The total cost of an HPLC detector system with LEDs is approximately $750. In contrast, HPLC systems using xenon light sources require more expensive equipment to build. The necessary power supplies are much more expensive and require space to store the lights. In addition, xenon lamps are broad-spectrum light sources that emit many wavelengths of light in the ultraviolet range. This requires an expensive filter and monochromator for fixed wavelength HPLC detection. Therefore, typical system costs are expected to be close to $4,000. Figure 1 shows a typical instrument design using a xenon lamp (a) and a UVC LED (b).
figure 1
The optical path of a fixed wavelength HPLC detector using a xenon lamp source (a) is a little more complicated than the optical path of a fixed wavelength HPLC detector using UVC LED (b).
Reduce the cost of DNA purity measurements
Another example of the use of UVC LEDs to be discussed next is DNA concentration and purity measurements. DNA extraction ensures the integrity of biological research and can affect many areas such as biotechnology, forensics, genomics research and drugs. This includes the detection of genetic disorders, the production of DNA fingerprints, and the production of genetically engineered organisms.
In these applications, the key to increasing productivity and reducing costs is the speed and accuracy of the measurements. DNA and protein have absorption peaks at 260 nm and 280 nm, and the absorbance at these wavelengths determines the concentration of DNA and protein, respectively, and the ratio of absorbance determines the purity of the DNA sample. Spectrometers for DNA concentration and purity measurements rely on xenon flash lamps, which provide instant on/off, allowing rapid evaluation of high linearity measurements over a wide concentration range.
While broad-spectrum UV lamps (such as Xenon flash lamps) can produce sufficient light at multiple wavelengths (most of which can be seen in the visible spectrum), only specific wavelengths of light can be used for single parameter measurements. Since DNA purity is determined by absorption measurements made at 260 nm and 280 nm, other components, such as filters and mirrors, must be used to filter out unwanted wavelengths before the broad spectrum light is illuminated into the sample. Xenon flash lamps also require high voltages and increase the protection of electronic equipment during lighting. These expensive electronic devices, along with other optical components, quickly increase the overall cost of the instrument.
LED and UV lamp spectrum
When measuring the absorbance of DNA or protein, the UVC LED can match the measurement performance of Xenon flash lamps in a narrow wavelength range. Figure 2 compares the spectral irradiance of 1-mW, 260nm UVC LEDs with a 15W xenon flash lamp.
figure 2
The power output of the xenon flash lamp and UVC LED at 260 nm, the spectral comparison shows the energy wasted by the xenon lamp and the higher peak power of the LED source.
The high light output of the LED allows researchers to limit the concentration of double-stranded DNA (dsDNA) to 0.5 ng/μl, and the excellent spectral quality of the LED can be measured linearly in three orders of magnitude, from 0.5-2000 ng/μl ( image 3).
image 3
The double-stranded DNA (dsDNA) concentration was measured with a UV-C LED at 260 nm, and the results showed an almost perfect linearity at different concentration levels.
The performance and monochromaticity of LEDs make LED design simpler than xenon flash instruments, requiring fewer optics and thus lowering system cost. In addition, the power supply of UV-C LEDs is less complex and less expensive. Reduced component costs can produce more cost-effective instruments without sacrificing the performance of DNA purity measurements.
LED system efficiency
Component costs provide significant differences in initial system cost. However, system efficiency is also a factor in overall cost. In the system example given here, the power consumption of the UV LED system is approximately 2W (1W per LED). Typical xenon flash lamps have an average power between 2W and 60W. In fact, the UVC LED system provides a more efficient source for fixed wavelength measurements. Since the large amount of light output of the xenon flash lamp is filtered out at unwanted wavelengths, as shown in Figure 2, the LED will provide more power output at the desired wavelength.
As shown here, systems using UVC LEDs can match or even exceed the performance of using UV lamp systems while providing greater efficiency and lower cost for fixed wavelength applications. The equivalent performance allows instrument designers to take advantage of other advantages of UVC LEDs, such as cost and size, without sacrificing product performance. UVC LEDs enable longer instrument life, higher reliability and higher productivity while reducing the overall cost to the end user. These new devices are driving innovation in life science instrumentation to address market trends around productivity, cost reduction and miniaturization.
December 21, 2024
December 16, 2024
November 15, 2024
November 09, 2024
August 27, 2024
April 23, 2024
Mail an Lieferanten
December 21, 2024
December 16, 2024
November 15, 2024
November 09, 2024
August 27, 2024
April 23, 2024
Telefonnummer: 86-0755-89752405
Mobiltelefon: +8615815584344
E-Mail-Adresse: amywu@byt-light.comFirmenadresse: Building No. 1 Lane 1 Liuwu Nanlian The Fifth Industry Area , Longgang, Shenzhen, Guangdong China
Webseite: https://de.bestsmd.com
Privacy statement: Your privacy is very important to Us. Our company promises not to disclose your personal information to any external company with out your explicit permission.
Fill in more information so that we can get in touch with you faster
Privacy statement: Your privacy is very important to Us. Our company promises not to disclose your personal information to any external company with out your explicit permission.